Duraplate uhs data sheet.

A two-component, ultra high-solids epoxy amine. Dura-Plate® UHS. A two-component, ultra high-solids epoxy amine. Engineered specifically for immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Epoxy provides superior protection through its high-build, edge-retentive properties as compared to conventional epoxies.A low-temperature application and curing version of our Dura-Plate® 301K ultra-surface and moisture-tolerant high-solids epoxy coating platform, Dura-Plate® 301W may be applied at ambient and substrate temperatures as low as 35°F (2°C). It is engineered to provide outstanding adhesion and anti-corrosion performance over a wide range of ...Dura-Plate® 8200 offers high temperature and chemical resistant protection against aggressive chemicals and crude oil mixes. This rapid cure lining allows assets to return to service within 24 hours, saving the owner the added expense of additional downtime. Plus, it can be applied with a single leg sprayer, allowing for easier application. Recommended in immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Primer is formulated specifically as a primer for use under Dura-Plate UHS topcoat. The primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces. Nova-Plate® UHS. A two-component, ultra high-solids novolac amine epoxy tank lining. ... Product data is a representative set of attributes and characteristics for this system or product line. Data for individual products may vary and is subject to change. Please reference the individual product datasheet for exact specifications on the ...

DURA-PLATE 6000 is a 100% solids, high build, high strength, reinforced epoxy lining for concrete and steel in severe service environments with fast return-t...

Jun 7, 2023 · This application guide must be read in-conjunction with the relevant specification, technical data sheet (TDS) and safety data sheet (SDS). Contractors …

DURA-PLATE® UHS Epoxy (Part B), Hardener - Clear MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a).DURA-PLATE® UHS Epoxy (Part B) Hardener - Clear Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::Dura-Plate 301 is an excellent surface and humidity anti-corrosive epoxy, formulated for application over marginally prepared surfaces. Apply over wet surfaces. Apply over flash-rust (WJ2M – SSPC VIS4) Can be applied over existing coatings. Standard airless, brush or roller application. Excellent adhesion – up to 25 MPa (3625 PSI).5 days ago · A two-component, ultra high-solids epoxy amine.Cleveland, OH, USA. Nova-Plate® UHS Epoxy. Nova-Plate® UHS Topcoat is an ultra high solids epoxy novolac amine engineered specifically for immersion service in ballast tanks, oil tanks, refined fuel storage tanks, and for well deck overheads. The high build, edge retentive properties of Nova-Plate® UHS Topcoat provide superior protection ...

Back Safety Data Sheets Back Para Los PRO Back Special Offers Back ... DURA-PLATE UHS Ultra High Solids N Epoxy (Part A) {{ ctrl.bvAvgRatingForScrReaders }} Star rating …

Epóxico Dura-Plate UHS. Es un epóxico amina de ultra altos sólidos diseñado específicamente para inmersiones en tanques de lastre, tanques de aceite y tanques de almacenaje de combustible refinado. Las propiedades de alto espesor y protección de bordes de Dura-Plate UHS proveen protección superior comparado con epóxicos convencionales.

DuraPlate is a proven product made by a recognized leader in composite panel technology. Wabash National produces over 50 million square feet of DuraPlate a year. We carefully monitor the DuraPlate manufacturing process to assure its quality and performance. You can trust DuraPlate to deliver, time and time again.DURA-PLATE® UHS Epoxy Primer (Part A) Buff Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::A two-component, ultra high-solids epoxy amine. Recommended in immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Primer is formulated specifically as a primer for use under Dura-Plate UHS topcoat. The primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel ...2 days ago · Data Sheets. Benefits. For use over prepared steel or concrete surfaces in industrial and marine exposures. Oil storage tank interiors, refined fuel storage tanks, potable water tanks, water pipes. Water and … A two-component, ultra high-solids epoxy amine. Engineered specifically for use as a laminating system in immersion service in ballast tanks, oil tanks and refined fuel storage tanks, Dura-Plate® UHS Clear Laminate provides superior protection through its high-build properties as compared to conventional epoxies. DURA-PLATE® 235 Multi-Purpose Epoxy (Part A) Haze Gray Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::

DURA-PLATE 6000 is a 100% solids, high build, high strength, reinforced epoxy lining for concrete and steel in severe service environments with fast return-t...Dura-Plate UHS with Opti-Check Technology High-performance, general-purpose solvent-free epoxy amine lining Lining: Nova-Plate UHS @ 500µm dft Carbon steel: Blast clean to Sa2½ BS EN ISO 8501-1:2007 0 1 Lining: Dura-Plate UHS @ 500µm dft Carbon steel: Blast clean to Sa2½ BS EN ISO 8501-1:2007 0 1 Lining: Dura-Plate UHS direct mixDURA-PLATE UHS Epoxy Tank Lining - Standard Hardener Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II D335A DURA-PLATE UHS Epoxy Tank Lining - Standard Hardener SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this SDS:hse.pm.emea ...DURA-PLATE® UHS Epoxy (Part B) Green Hardener Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::DURA-PLATE 235 Multi-Purpose Epoxy is a modifi ed epoxy phenalkamine, formulated specifi cally for immersion and atmospheric service in marine and industrial environments. Dura-Plate 235 provides exceptional performance in corrosive environment, and can be applied at temperatures as low as 0°F (-18°C). Self-priming.

Are you new to Excel and looking for a way to practice your skills? Look no further than an Excel data sheet for practice. Whether you’re a student, a professional, or just someone...

Dura-Plate UHS Sher-Plate PW *Maximum of 28.0 mils (700 microns) for entire system The systems listed above are representative of the product's use, other systems may be appropriate. D (2 " + (, $ 1 The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams ...2 days ago · Data Sheets. Benefits. For use over prepared steel or concrete surfaces in industrial and marine exposures. Oil storage tank interiors, refined fuel storage tanks, potable water tanks, water pipes. Water and …PRODUCTDESCRIPTION. DURA-PLATE UHS For use over prepared steel or concrete surfaces in industrial and marine The rapid return to service and high build, edge retentive properties of this superior tank lining provide superior protection. Can be applied by conventional airless pumps in a single coat, Dura-Plate UHS is the user friendly solution ...2 Cts. Nova-Plate UHS 10.0-12.0 (250-300) Steel, Immersion & Atmospheric 1 Ct. Nova-Plate UHS 15.0-35.0 (375-875) NOTE: Nova-Plate UHS may be applied at alternate thicknesses, up to 60 mils (1,500 microns), depending on application conditions. Consult your Sherwin-Williams representative for additional information.Dura-Plate® UHS | Sherwin-Williams. A two-component, ultra high-solids epoxy amine.1 ct. Dura-Plate 2300 as needed to fi ll surface imperfections 1 ct. (Optional) Primer as defi ned above 1 ct. Dura-Plate 6000 60.0-125.0+** (1,500-3,125) ... The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company.

DURA-PLATE® UHS Epoxy (Part A) OAP Blue Not available. Liquid. US / Canada: (216) 566-2917 Mexico: SETIQ 01-800-00-214-00 / (52) 55-5559-1588 24 hours / 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Manufacturer :THE SHERWIN ...

PrOduct iNFOrmatiON. aPPLicatiON BuLLetiN. aPPlication Procedures. Surface preparation must be completed as indicated.

PRODUCTCHARACTERISTICS. FinishGloss. Colour:White . Volume Solids:98% ± 2%, mixed. Weight Solids:98% ± 2%, mixed. VOC: <155 g/ltr . Mix Ratio:4:1 by volume. …DURA-PLATE® UHS Epoxy (Part B) Hardener - Clear Not available. Liquid. US / Canada: (216) 566-2917 Mexico: SETIQ 01-800-00-214-00 / (52) 55-5559-1588 24 hours / 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification:::: Dura-Plate UHS Primer provides excellent surface wetting and adhesion properties, especially over rust pitted steel surfaces. • Airless Spray • Low odor • High fl ash point, >200°F (93°C) • Low Temperature Hardener for applications from 40°F to 77°F (4.5°C to 25°C) • NSF approved to Standard 61/600 for potable water (tanks of ... Dura-Plate® 8200 High Temperature Epoxy Part A, Gray MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a).DURA-PLATE UHS Epoxy Tank Lining - Standard Hardener Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II D335A DURA-PLATE UHS Epoxy Tank Lining - Standard Hardener SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this …DURA-PLATE® UHS Epoxy (Part B) Hardener - Clear Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::NOTE: Dura-Plate UHS may be applied at alternate thicknesses, up to 50 mils (1,250 microns), depending on application conditions. Consult your Sherwin-Williams representative for ... to obtain the most recent Product Data Sheet. DURA-PLATE® UHS EPOXY TANK LINING. Title: Dura-Plate UHS_1301-1.indd Author: dxg719 Created Date:DURA-PLATE® 6000 Reinforced Epoxy (Part A) White Not available. Liquid. US / Canada: (800) 424-9300 Mexico: SETIQ 800-00-214-00 / 55-5559-1588 Available 24 hours and 365 days a year SAFETY DATA SHEET Product name Other means of identification Product type Emergency telephone number of the company Section 1. Identification::::

DURA-PLATE® UHS Epoxy (Part B) - Hardener - Clear Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II B62V210 DURA-PLATE® UHS Epoxy (Part B) - Hardener - Clear SAFETY DATA SHEET Product name: 1.1 Product identifier 1.3 Details of the supplier of the safety data sheet e-mail address of person responsible for this …Shelf Life: 24 months, unopened Store indoors at 40°F (4.5°C) to 100°F (38°C). Flash Point: 230°F (110°C), PMCC, mixed Reduction: Not recommended. Clean Up: MEK (R6K10) or R7K104. NOVA-PLATE UHS PRIMER is an ultra high solids epoxy novolac amine formulated specifi cally for use under Nova-Plate UHS Top-coat.PRODUCT DESCRIPTION. DURA-PLATE UHS is an ultra-high solids, edge retentive epoxy with proven long term performance as a lining for bulk storage tanks, ballast tanks, pipe internals and secondary containment. Applied using normal or plural airless spray.1 ct. Dura-Plate 2300 as needed to fi ll surface imperfections 1 ct. (Optional) Primer as defi ned above 1 ct. Dura-Plate 6000 60.0-125.0+** (1,500-3,125) ... The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company.Instagram:https://instagram. gainesville florida accidentlvrd pharaoh agebambi hypnom4 vs 1301 Dura-plate UHS Epoxy 3.3 4:1 Dura-plate UHS Epoxy 3.3 4:1 Coating System Reference. TR0042 v.8 System 3A Surface Cleanliness. Sa2½ according to ISO 8501-1 ... 2. The time stated refers to cure-to-service. For handling times please see individual Product Technical Data Sheet. DNT Do Not Thin Notes 1. Dura-plate 301K is for fair to warm climate ...Shelf Life: 24 months, unopened Store indoors at 40°F (4.5°C) to 100°F (38°C). Flash Point: 230°F (110°C), PMCC, mixed Reduction: Not recommended. Clean Up: MEK (R6K10) or R7K104. NOVA-PLATE UHS PRIMER is an ultra high solids epoxy novolac amine formulated specifi cally for use under Nova-Plate UHS Top-coat. jasper alabama crime ratekaiser 24 hour pharmacy vallejo A two-component, PFTE, inert, flake-reinforced novolac tank lining. Nova-Plate® 360 can be applied by single-leg airless or plural-component airless application with return to service times in as little as 24 hours. It has excellent abrasion resistance and it incorporates Optical Activated Pigment (OAP) technology to improve the accuracy and ...DURA-PLATE™ UHS: A two component, ultra-high-solids epoxy amine tank lining. D335: EPO-PHEN™ FF: A two component, flake-filled MIO, amine-cured, epoxy phenolic novolac coating. E350: FAST CLAD™ ER: A two component, fast-drying, ultra-high-solids epoxy tank lining with Opti-Check™, Optically Activated Pigments (OAP) technology. E130 ... christopher baker pagans 1 Ct. Dura-Plate UHS 18.0-22.0 (450-550) The systems listed above are representative of the product's use, other systems may be appropriate. ... The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of The Sherwin-Williams Company. Such informa-DURA-PLATE® UHS Epoxy (Part B), Hardener - Clear MANUFACTURER'S NAME THE SHERWIN-WILLIAMS COMPANY 101 W. Prospect Avenue Cleveland, OH 44115 This document includes all data required by 40 CFR 63.801(a) for a Certified Product Data Sheet under criteria specified in 40 CFR 63.805(a).AS MIXED (as per product data sheet): DURA-PLATE* UHS Ultra High Solids Epoxy (Part A) AS MIXED Product Weight 10.56 lb/gal Specific Gravity 1.27 FLASH POINT 20 °F TCC Volatile Ingredients Chemical / Compound SARA 302 EHS CERCLA SARA 313 TC HAPS 112 % by Weight % by Volume Phenylmethanol 100-51-6 N N N N 9 11 Regulated …